Conditions in Which the Remote Start Will Not Work
The vehicle cannot be started using the remote start feature if the key is in the ignition, the hood is open, or if there is an emission control system malfunction.
The engine turns off during a remote start if the coolant temperature gets too high or if the oil pressure gets low.
See also:
Turning the System On and Off
The system can be disabled through the Driver Information Center (DIC).
See “Park Assist” under Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information.
URPA defaults ...
Storing the Tools
A. Tool Bag
B. Wing Bolt
C. Jack
Put back all tools as they were stored in the jack storage compartment and put the compartment cover back on.
1. Ensure that the bottom of the jack is facing tow ...
To Use the Engine Coolant Heater
1. Turn off the engine.
2. Open the hood and unwrap the electrical cord. The cord is secured to the Engine Compartment Fuse Block with a clip. Carefully remove the wire tie which bundles the electric ...