Maintenance Schedule
See also:
Ride Control System Messages
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak® system. If this message appears, try to reset the system. Stop; turn off the engine for at least 15 seconds;
th ...
How the System Works
URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working.
URPA operates only at speeds less than 8 km/h (5 mph).
An obstacle ...
Compass Messages
CAL
This message is displayed when the compass needs to be calibrated. See Compass
on page 5‑5.
– – –
Three dashes will be displayed if the compass needs service. See your dealer
fo ...





