Instrument Panel Fuse Block
The instrument panel fuse block is located on the passenger side panel of the center console. To access the fuses, open the fuse panel door from the passenger side by pulling it out.
To reinstall the door, insert the tabs on the top of the door into the console first, then push the door back into its original location.
The vehicle may not be equipped with all of the fuses, relays, and features shown.
Instrument Panel Fuse Block
See also:
Passenger Sensing System
The passenger sensing system, if equipped, turns off the front outboard passenger frontal airbag under certain conditions. No other airbag is affected by the passenger sensing system.
If the vehicle ...
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located.
See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Charging System Light
The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working.
It should go out when the engine is started.
If t ...