Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.
○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
○ The ignition key should come out only in LOCK/OFF.
Contact your dealer if service is required.
See also:
Protecting Exterior Bright Metal Parts
Regularly clean bright metal parts with water or chrome polish on chrome or stainless steel trim, if necessary.
For aluminum, never use auto or chrome polish, steam, or caustic soap to clean. A coati ...
Bulb Replacement
For the proper type of replacement bulbs, see Replacement Bulbs on page 10‑29.
For any bulb-changing procedure not listed in this section, contact your dealer. ...
Steering, Suspension, and Chassis Components
Visually inspect front and rear suspension and steering system for damaged, loose,
or missing parts or signs of wear. Inspect power steering lines and hoses for proper
hook-up, binding, leaks, cra ...