How to Reinstall Engine Air Cleaner/Filter

1. Install the air cleaner filter into the air cleaner housing. The outer air cleaner filter seal must be fitted properly in the air cleaner housing.
2. Align the air cleaner housing cover tabs to the air cleaner housing.
3. Install the air cleaner housing cover using the four screws.

WARNING

Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop flames if the engine backfires. Use caution when working on the engine and do not drive with the air cleaner/filter off.

Notice: If the air cleaner/filter is off, dirt can easily get into the engine, which could damage it. Always have the air cleaner/filter in place when you are driving.

    See also:

    Chemical Paint Spotting
    Airborne pollutants can fall upon and attack painted vehicle surfaces causing blotchy, ring-shaped discolorations, and small, irregular dark spots etched into the paint surface. ...

    Starting the Engine Using Remote Start
    To start the vehicle: 1. Aim the RKE transmitter at the vehicle. 2. Press and release on the RKE transmitter. 3. Immediately after completing Step 2, press and hold until the parking lamps flash. ...

    Removing the Flat Tire and Installing the Spare Tire
    Use the following pictures and instructions to remove the flat tire and raise the vehicle. A. Jack B. Wheel Blocks C. Jack Handle D. Jack Handle Extension E. Wheel Wrench The tools you will be ...