Hood

To open the hood:

1. Pull the release handle located below the instrument panel to the left of

1. Pull the release handle located below the instrument panel to the left of the steering wheel.

2. Move the secondary hood release lever to the right to release the striker.

2. Move the secondary hood release lever to the right to release the striker. The lever is near the middle of the hood.

3. Lift the hood.

To close the hood:

1. Before closing the hood, be sure all the filler caps are on properly.

2. Lower the hood 30 cm (12 in) above the vehicle and release it so it fully latches. Check to make sure the hood is closed and repeat the process if necessary.

    See also:

    When the System Does Not Seem To Work Properly
    The RVC system might not work properly or display a clear image if: • The RVC is turned off. See “Turning the RVC System On or Off” earlier in this section. • It is dark. • The sun or the ...

    2008 GMC Yukon Review
    The 2007 GMC Yukon — along with the Cadillac Escalade and Chevrolet Tahoe — is one of three completely redesigned full-size SUVs from General Motors. I've driven all three, and with the except ...

    Using Softkeys to Control a USB Storage Device or iPod
    The five softkeys below the radio display are used to control the functions listed below. To use the softkeys: 1. Press the first or fifth softkey below the radio display to display the functions li ...