Shifting out of Park
To shift out of P (Park):
1. Apply the brake pedal.
2. Turn the ignition to ON/RUN.
3. Press the shift lever button.
4. Move the shift lever.
If you still are unable to shift out of P (Park):
1. Fully release the shift lever button.
2. Hold the brake pedal down and press the shift lever button again.
3. Move the shift lever.
If you still cannot move the shift lever from P (Park), see your dealer for service.
See also:
Power Liftgate Operation
On vehicles with a power liftgate, the vehicle must be in P (Park) to use the
power feature. The taillamps flash when the power liftgate moves.
Notice: If you open the liftgate without checking f ...
Using the “Digit Dial” Command
The digit dial command allows a phone number to be dialed by entering the digits one at a time.
After each digit is entered, the system repeats back the digit it heard followed by a tone.
If an unwa ...
Entering the Feature Settings Menu
1. Turn the ignition on and place the vehicle in P (Park).
To avoid excessive drain on the battery, turn the headlamps off.
2. Press the customization button to scroll through the available customiz ...





