Voice Pass-Thru

Voice pass&-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature.

To access contacts stored in the cell phone:

1. Press followed by a tone.. The system responds “Ready,” followed by a tone.
2. Say “Bluetooth.” This command can be skipped.
3. Say “Voice.” The system responds “OK, accessing <phone name>.”

The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions.

    See also:

    When the System Does Not Seem to Work Properly
    The following messages may be displayed on the DIC: SERVICE PARK ASSIST: If this message occurs, take the vehicle to your dealer to repair the system. PARK ASST BLOCKED SEE OWNERS MANUAL: This messa ...

    Safety Locks
    The vehicle has rear door security locks to prevent passengers from opening the rear doors from the inside. Open the rear doors to access the security locks on the inside edge of each door. To set ...

    Replacing the Engine Air Cleaner/ Filter
    1. Locate the air cleaner/filter assembly. See Engine Compartment Overview on page 10‑6. 2. Loosen the four screws on the cover of the housing and lift up the cover. 3. Remove the engine a ...