Playing an Audio CD
1. Press the CD screen button on the Home Page or select CD from the source pop-up to display the CD main page.
2. From the CD screen, press the Menu screen button to display the menu options.
3. Press to select the desired option.
On the CD main page a track number displays at the beginning of each track. Song, Artist, and Album information displays when available.
Use the following controls to play the disc:
(Play/Pause): Use to start, pause,
or resume play.
SEEK (Seek Down):
○ Press to seek to the beginning of the current or previous track. If the track has been playing for less than five seconds, it seeks to the previous track. If longer than five seconds, the current track starts from the beginning.
○ Press and hold to fast reverse through a track. Release the button to return to playing speed. Elapsed time displays.
SEEK (Seek Up):
○ Press to seek to the next track.
○ Press and hold to fast forward through a track. Release the button to return to playing speed. Elapsed time displays.
MENU/SEL: Turn to the right or left to select the next or previous track. Press this knob to select the menu. If a track is selected from the list, the system plays the track and returns to the CD screen.
See also:
Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill.
In order to get an accurate reading, the vehicle must be on level ground.
The engine oil dipstick handle is a yellow loop. See Engi ...
Weight-Distributing Hitch Adjustment
A. Body to Ground Distance
B. Front of Vehicle
When using a weight-distributing hitch, the spring bars should be adjusted so the distance (A) is the same after coupling the trailer to the tow vehi ...
Daytime Running Lamps (DRL)
Daytime Running Lamps (DRL) system makes the low-beam headlamps come on at a
reduced brightness in daylight when the following conditions are met:
○ The ignition is on.
○ The exterior ...





