See also:

Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the two screw covers from the taillamp assembly. 3. Remove the two screws securing the taillamp asse ...

New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • If you have all-wheel drive, keep your speed at 88 km/h (55 mp ...

Curve Tips
• Take curves at a reasonable speed. • Reduce speed before entering a curve. • Maintain a reasonable steady speed through the curve. • Wait until the vehicle is out of the curve before acce ...