Exterior Lamp Controls
The exterior lamp control is on the turn signal/lane change lever.
(Exterior Lamp Control): Operates
the exterior lamps. Turn to one of the following positions:
(Off): Briefly turn to this position
to turn the automatic light control off or on again.
AUTO (Automatic Headlamps): Turns the exterior lamps on and off automatically depending on the exterior light. The vehicle will default to the AUTO setting when it is first started.
(Parking Lamps): Turns on the parking
lamps together with the following:
○ Sidemarker Lamps
○ Taillamps
○ License Plate Lamps
○ Instrument Panel Lights
(Headlamps): Turns on the headlamps,
together with the previously listed lamps and lights.
See also:
Trailer Wiring Harness
Basic Trailer Wiring
The trailer wiring harness, with a seven-pin connector, is located at the rear of the vehicle and is tied to the vehicle's frame. The harness connector can be plugged into a seve ...
Auxiliary Battery
The auxiliary battery provision can be used to supply electrical power to additional equipment that may be added, such as a slide-in camper.
If the vehicle has this provision, this relay will be loca ...
Emissions Inspection and Maintenance Programs
Some local governments may have programs to inspect the on-vehicle emission control equipment. For the inspection, the emission system test equipment is connected to the vehicle’s Data Link Connecto ...