Windshield Wiper/Washer

The windshield wiper/washer lever is located on the right side of the steering

The windshield wiper/washer lever is located on the right side of the steering column. With the ignition in ACC/ACCESSORY or ON/RUN/ START, move the windshield wiper lever to select the wiper speed.

HI: Use for fast wipes.

LO: Use for slow wipes.

INT: (Intermittent Wipes): Move the lever up to INT for intermittent wipes, then turn theor down for less frequent wipes. band up for more frequent wipes or down for less frequent wipes.

Use to turn the wipers off.

For a single wipe, briefly moveUse to turn the wipers off.

the wiper lever down. For several wipes, hold the wiper lever down. For a single wipe, briefly move the wiper lever down. For several wipes, hold the wiper lever down.

the windshield wiper lever toward you to spray windshield washer fluid and activate FRONT (Windshield Washer): Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. The wipers will continue until the lever is released or the maximum wash time is reached. When the windshield wiper lever is released, additional wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid on page 10‑23 for information on filling the windshield washer fluid reservoir.

WARNING

In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.

Clear snow and ice from the wiper blades before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged blades should be replaced. See Wiper Blade Replacement on page 10‑28.

Heavy snow or ice can overload the wiper motor.

See also:

Power Mirrors
To adjust the mirrors: 1. Move the selector switch to L (left) or R (right) to choose the driver or passenger mirror. 2. Press the arrows on the control pad to move each mirror in the desired di ...

General Information
Your vehicle is an important investment. This section describes the required maintenance for the vehicle. Follow this schedule to help protect against major repair expenses resulting from neglect or i ...

Compass Variance (Zone) Procedure
1. Do not set the compass zone when the vehicle is moving. Only set it when the vehicle is in P (Park). Press the vehicle information button until PRESS TO CHANGE COMPASS ZONE displays. Or, if the v ...