Conditions in Which Remote Start Will Not Work
The remote vehicle start feature will not operate if:
○ The key is in the ignition.
○ The hood or doors are not closed.
○ The hazard warning flashers are on.
○ There is an emission control system malfunction.
○ The engine coolant temperature is too high.
○ The oil pressure is low.
○ Two remote vehicle starts have already been used.
○ The vehicle is not in P (Park).
See also:
Fog Lamps
Fog Lamps
For vehicles with fog lamps, the control is located next to the exterior lamps control on the instrument panel, to the left of the steering column.
The ignition must be in the ON/RUN pos ...
Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
To use the air compressor to inflate a tire with air only and not sealant:
If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning fl ...
OnStar Personal Identification Number (PIN)
A PIN is needed to access some of the OnStar services, like Remote Door Unlock and Stolen Vehicle Assistance. You will be prompted to change the PIN the first time when speaking with an Advisor. To ch ...