Remote Keyless Entry (RKE) System

See Radio Frequency Statement on page 13‑21 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.

If there is a decrease in the RKE operating range:

○ Check the distance. The transmitter may be too far from the vehicle.
○ Check the location. Other vehicles or objects may be blocking the signal.
○ Check the transmitter's battery. See “Battery Replacement” later in this section.
○ If the transmitter is still not working correctly, see your dealer or a qualified technician for service.

    See also:

    Electronic Range Select (ERS) Mode
    ERS or manual mode allows for the selection of the range of gear positions. Use this mode when driving down hill or towing a trailer to limit the top gear and vehicle speed. To use this feature: ...

    Feature Settings Menu Items
    The following are customization features that allow you to program settings to the vehicle: DISPLAY IN ENGLISH This feature will only display if a language other than English has been set. This feat ...

    Flash-to-Pass
    This feature is used to signal to the vehicle ahead that you want to pass. If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high be ...