Pick-Up Box Identification and Fender Marker Lamps
The pick-up box identification lamps are LEDs. For replacement of the LED lighting assembly contact your dealer.
To replace a pickup box fender marker lamp bulb:
1. Press the tab from the back to remove the lamp.
2. Turn the bulb socket counterclockwise to remove from the lamp assembly.
3. Gently pry the bulb from the socket.
4. Install the new bulb in socket.
5. Reinstall socket into lamp assembly.
6. Reinstall the lamp assembly.
See also:
Power Outlets
Accessory power outlets can be used to plug in electrical equipment, such as a cell phone, MP3 player, etc.
The vehicle may have two accessory power outlets located below the climate control system, ...
Engine Oil Life System
The engine oil life system calculates engine oil life based on vehicle use and displays the CHANGE ENGINE OIL SOON message when it is time to change the engine oil and filter.
The oil life system sho ...
Cruise Control Messages
CRUISE SET TO XXX
This message displays whenever the cruise control is set. See Cruise Control on page 9‑32 for more information. ...