Wiper Blade Replacement

Windshield wiper blades should be inspected for wear or cracking. See Maintenance Schedule on page 11‑3 for more information on wiper blade inspection.

Replacement blades come in different types and are removed in different ways. To remove the wiper blade:

1. Pull the windshield wiper arm connector away from the windshield.

2. Squeeze the grooved areas on each side of the blade, and turn the blade assembly away from the arm connector.

2. Squeeze the grooved areas on each side of the blade, and turn the blade assembly away from the arm connector.

3. Install the new blade onto the arm connector and make sure the grooved areas are fully set in the locked position.

3. Install the new blade onto the arm connector and make sure the grooved areas are fully set in the locked position.

For the proper type and size, see Maintenance Replacement Parts on page 11‑15.

    See also:

    Under the Hood
    The Canyon is available with a choice of three engines, and rear- and four-wheel-drive versions are available. Mechanical features include: Base 185-horsepower, 2.9-liter four-cylinder makes 190 p ...

    Transmission Messages
    SERVICE 4 WHEEL DRIVE If the vehicle has four-wheel drive, this message may display if a problem occurs with the four-wheel-drive system. If this message appears, stop as soon as possible and turn of ...

    AM
    The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. For better radio reception, most AM radio stati ...