Checking Brake Fluid
Check brake fluid by looking at the brake fluid reservoir. See Engine Compartment Overview on page 10‑6.
The fluid level should be above MIN. If it is not, have the brake hydraulic system checked to see if there is a leak.
After work is done on the brake hydraulic system, make sure the level is above the MIN but not over the MAX mark.
See also:
Tire Terminology and Definitions
Air Pressure: The amount of air inside the tire pressing outward on each square
inch of the tire. Air pressure is expressed in kPa (kilopascal) or psi (pounds per
square inch).
Accessory Weight: ...
Flash-to-Pass
The flash&-to&-pass feature works with the low beams or Daytime Running Lamps
(DRL) on or off.
To flash the high beams, pull the turn signal/lane change lever all the way toward
you, then ...
How to Add Coolant to the Coolant Surge Tank for Gasoline Engines
If the vehicle has a diesel engine, see “Cooling System” in the Duramax Diesel Supplement for the proper coolant fill procedure.
WARNING
You can be burned if you spill coolant on hot engine part ...