Lane Departure Warning (LDW)

For vehicles with LDW, it is intended to help avoid unintentional lane departures. It may provide a warning if the vehicle is crossing a lane without using a turn signal. LDW uses a camera sensor to detect the lane markings. It only operates at speeds of 56 km (35 mph) or greater.

The LDW indicator, @, appears green if a lane marking is detected. It changes to amber, flashes, and sounds three chimes if the vehicle crosses a detected lane marking without using the turn signal.

To turn LDW on and off, press the LANE DEPART button, located on the steering

To turn LDW on and off, press the LANE DEPART button, located on the steering wheel.

See Lane Departure Warning (LDW) on page 9‑48 for more information.

    See also:

    Rear Vision Camera Location
    The camera is located above the license plate. The area displayed by the camera is limited. It does not display objects that are close to either corner or under the bumper and can vary depending ...

    Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire
    Follow the directions closely for correct sealant usage. When using the tire sealant and compressor kit during cold temperatures, warm the kit in a heated environment for five minutes. This will h ...

    Remote Control
    To use the remote control, aim it at the transmitter window at either seatback console and press the button. Direct sunlight or very bright light could affect the ability of the RSE transmitter ...