Leaving After Parking on a Hill

1. Apply and hold the brake pedal.

2. Start the engine.

3. Shift into a gear.

4. Release the parking brake.

5. Let up on the brake pedal.

6. Drive slowly until the trailer is clear of the chocks.

7. Stop and have someone pick up and store the chocks.

    See also:

    Compass Calibration Procedure
    1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. Do not ...

    Customer Assistance for Text Telephone (TTY) Users (U.S. and Canada)
    To assist customers who are deaf, hard of hearing, or speech impaired and who use Text Telephones (TTYs), GMC has TTY equipment available at its Customer Assistance Center. Any TTY user can communicat ...

    Add-On Electrical Equipment
    Notice: Do not add anything electrical to the vehicle unless you check with your dealer first. Some electrical equipment can damage the vehicle and the damage would not be covered by the vehicle&# ...