Adjusting the Brightness and Contrast of the Screen

To adjust the brightness and contrast of the screen, press the MENU button while the RVC image is on the display. Any adjustments made will only affect the RVC screen.

(Contrast): Touch the + (plus) or – (minus) screen buttons to increase or decrease the contrast of the screen. (Brightness): Touch the + (plus) or – (minus) screen buttons to increase or decrease the brightness of the screen.

Symbols (Contrast): Touch the + (plus) or – (minus) screen buttons to increase or decrease the contrast of the screen.

    See also:

    Adjusting the Speakers (Balance/Fade) (All Except AM-FM Radio and Radio with CD)
    BAL/FADE (Balance/Fade): To adjust the balance or fade: 1. Press the knob until the speaker control tabs display. 2. Highlight the desired speaker control tab by doing one of the following: • Pr ...

    Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
    To use the air compressor to inflate a tire with air only and not sealant: If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning fl ...

    Engine Hour Meter Display
    The Driver Information Center (DIC) can also display the number of hours the engine has run. To display the engine hours, turn the ignition off, then press and hold the reset button for at least four ...