Reducing Speed While Using Cruise Control

GMC Sierra / GMC Sierra Owners Manuals / Driving and Operating / Cruise Control / Reducing Speed While Using Cruise Control

If the cruise control system is already activated, . Press and hold the SET– button on the steering wheel until the desired lower speed is reached, then release it.

• To slow down in small amounts, press the SET– button on the steering wheel briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) slower.

    See also:

    If No Steam is Coming from the Engine Compartment
    If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: ○ Climbs a ...

    Safety Belts
    Safety Belts Refer to the following sections for important information on how to use safety belts properly. • Safety Belts on page 3‑12. • How to Wear Safety Belts Properly on page 3& ...

    Shifting Into Two-Wheel Drive High
    Turn the knob to the Two-Wheel Drive High position. This can be done at any speed, except when shifting from Four-Wheel Drive Low. The indicator light will flash while shifting. It will remain on whe ...