Climate Control Systems (with Air Conditioning)
With this system the heating, cooling, and ventilation can be controlled.
A. Fan Control
B. Temperature Control
C. Air Delivery Mode Control
D. Air Conditioning
E. Outside Air
F. Recirculation
G. Rear Window Defogger
Temperature Control: Turn clockwise or counterclockwise to increase or decrease the temperature inside the vehicle.
(Fan Control): Turn clockwise or counterclockwise to increase or decrease the fan speed. Turn the knob all the way counterclockwise to turn the front system off.
Air Delivery Mode Control: Turn clockwise or counterclockwise to change the direction of the airflow inside the vehicle. The knob can be positioned between two modes to select a combination of those modes.
Select from the following:
(Vent): Air is directed to the instrument panel outlets.
(Bi-Level): Air is divided between the instrument panel and floor outlets.
(Floor): Air is directed to the floor outlets, with some air directed to the windshield and side window outlets. In this mode, the system automatically selects outside air.
Recirculation cannot be selected in floor mode.
(Defog): This mode clears the windows of fog or moisture. Air is directed to the windshield, floor outlets, and side window vents.
(Defrost): This mode removes fog or frost from the windshield more quickly. Air is directed to the windshield and the side window vents, with some air directed to the floor vents. The system automatically forces outside air into the vehicle.
The recirculation mode cannot be selected in the defog or defrost mode. When either mode is selected, the system runs the air conditioning compressor, unless the outside temperature is close to freezing.
Do not drive the vehicle until all the windows are clear.
(Outside Air): Press to turn the outside air mode on. An indicator light comes on to show that outside air is on. In this mode outside air circulates throughout the vehicle. The outside air mode can be used with all modes, but it cannot be used with the recirculation mode.
(Recirculation): Press to turn the recirculation mode on. An indicator light comes on to show that recirculation is on.
This mode recirculates and helps to quickly cool the air inside the vehicle. It can be used to help prevent outside air and odors from entering the vehicle.
The recirculation mode cannot be used with floor, defog or defrost modes. If recirculation is selected with one of these modes, the indicator light flashes three times and then turns off. While in recirculation mode the windows may fog when the weather is cold and damp. To clear the fog, select either the defog or defrost mode and increase the fan speed.
The recirculation mode can be turned off by pressing the outside air button, or by turning off the ignition.
(Air Conditioning): Press to turn the air conditioning system on or off. An indicator light comes on to show that the air conditioning is on.
The air conditioning can be selected in any mode as long as the fan switch is on.
The air conditioning system removes moisture from the air, so a small amount of water might drip under the vehicle while idling or after turning off the engine. This is normal.
See also:
Four-Wheel Drive
Transfer Case
When to Check Lubricant
Refer to Maintenance Schedule on page 11‑3 to determine when to check the lubricant.
How to Check Lubricant
Electric Shift Transfer Case
A. Fill Plug ...
Windshield and Wiper Blades
Clean the outside of the windshield with glass cleaner.
Clean rubber blades using a lint-free cloth or paper towel soaked with windshield
washer fluid or a mild detergent. Wash the windshield thoro ...
Under the Hood
Both the four-cylinder and V-6 engines use direct-injection technology. An
Eco mode, which is activated by a dashboard button, alters drivetrain
calibrations in the four-cylinder to maximize fuel ...