Connecting to a Different Phone
To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times.
1. Press and hold
for two seconds.
2. Say “Bluetooth.” 3. Say “Change phone.” . If another cell phone is found, the response will be “<Phone name> is now connected.” . If another cell phone is not found, the original phone remains connected.
See also:
Adjusting the Speakers (Balance/Fade) (AM-FM Radio and AM-FM Radio with CD)
To adjust the balance or fade:
1. Press or press the
knob until the speaker control label displays.
2. To adjust the setting, do one of the following:
• Turn the knob.
• Press either SEEK ...
Starting Procedure
1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the key. The idle speed will go down as your engine gets warm. Do not race the engine imm ...
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF
in each shift lever position.
○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...





