See also:

Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “Compass Variance (Zone) Procedure” earlier in this section. Do not ...

Shifting Out of Four-Wheel Drive Low
To shift from Four-Wheel Drive Low to Four-Wheel Drive High, AUTO or Two-Wheel Drive High, the vehicle must be stopped or moving less than 5 km/h (3 mph) with the transmission in N (Neutral) and the i ...

Fluids
Proper fluid levels and approved fluids protect the vehicle’s systems and components. See Recommended Fluids and Lubricants on page 11‑12 for GM approved fluids. • Engine oil and windshiel ...