Compass Recalibration
This display allows for calibrating the compass. See Compass on page 5‑6 for more information.
See also:
Manual Operation
(Fan Control): Press these buttons to increase or decrease the fan speed.
Pressing either fan button while in automatic control places the fan under manual control. The fan setting remains displayed ...
Disconnecting the RVC
The rear vision camera must be disconnected if the tailgate needs to be removed.
To disconnect the camera:
1. Remove the license plate.
2. Disconnect the camera connectors from the chassis harness, ...
Range Selection Mode
Range Selection Mode
The Range Selection Mode switch, if equipped, is located on the shift lever.
To enable the Range Selection feature:
1. Move the column shift lever to the M(Manual) position ...





