Trailer Gain and Output
On vehicles with the Integrated Trailer Brake Control (ITBC) system, the trailer brake display appears in the DIC. Press the trip odometer reset stem until TRAILER GAIN and OUTPUT display.
TRAILER GAIN shows the trailer gain setting. This setting can be adjusted from 0.0 to 10.0 with either a trailer connected or disconnected.
OUTPUT shows the power output to the trailer any time a trailer with electric brakes is connected. Output is displayed in 0 to 10 bars. Dashes may appear in the OUTPUT display.
To adjust trailer gain see “Integrated Trailer Brake Control System” under Towing Equipment on page 9‑100 for more information.
See also:
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
To replace one of these bulbs:
1. Open the tailgate. See Tailgate on page 2‑10 for more information.
2. Remove the two rear lamp assembly screws near the tailgate latch strikerpost and pull ...
Checking Engine Oil
It is a good idea to check the engine oil level at each fuel fill.
In order to get an accurate reading, the vehicle must be on level ground.
The engine oil dipstick handle is a yellow loop. See Engi ...
Removing and Replacing the Floor Mat
The driver side floor mat is held in place by two retainers.
1. Pull up on the rear of the floor mat to unlock each retainer and remove.
2. Reinstall by lining up the floor mat retainer openings o ...