Language
This display allows you to select the language in which the DIC messages will appear. To select a language:
1. Press the trip odometer reset stem until ODOMETER displays.
2. While in the ODOMETER display, press and hold the trip odometer reset stem for three seconds until the currently set language displays.
3. Continue to press and hold the trip odometer reset stem to scroll through all of the available languages.
The available selections are ENGLISH (default), FRANCAIS (French), ESPANOL (Spanish), and NO CHANGE.
4. Once the desired language is displayed, release the trip odometer reset stem to set the choice.
See also:
Leaving After Parking on a Hill
1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift into a gear.
4. Release the parking brake.
5. Let up on the brake pedal.
6. Drive slowly until the trailer is clear of the chocks. ...
Rear Window Lockout
The rear window lockout feature prevents the rear passenger windows from operating, except from the driver position.
Press to activate the rear window lockout switch. The LED light comes on when a ...
Erasing Universal Home Remote Buttons
The programmed buttons should be erased when the vehicle is sold or the lease ends.
To erase either Rolling Code or Fixed Code settings on the Universal Home Remote device:
1. Press and hold the two ...