Trip Odometer
The trip odometer shows how far the vehicle has been driven since the trip odometer was last set to zero.
Press the reset button, located on the instrument panel cluster next to the voltmeter, to toggle between the trip odometer and the regular odometer. Holding the reset button for approximately one second while the trip odometer is displayed will reset it.
To display the odometer reading with the ignition off, press the reset button.
See Driver Information Center (DIC) on page 5‑33 for more information.
See also:
Manual Mode
Electronic Range Select (ERS) Mode
ERS mode allows you to choose the top-gear limit of the transmission and the vehicle's speed while driving downhill or towing a trailer.
The vehicle has an electro ...
Ultrasonic Parking Assist
If available, the Ultrasonic Rear Parking Assist (URPA) system assists the driver with parking and avoiding objects while in R (Reverse). URPA operates at speeds less than 8 km/h (5 mph).
The sensors ...
How to Reinstall Engine Air Cleaner/Filter
1. Install the air cleaner filter into the air cleaner housing. The outer air
cleaner filter seal must be fitted properly in the air cleaner housing.
2. Align the air cleaner housing cover tabs to ...