Compass Zone
The zone is set to zone eight upon leaving the factory. Your dealer will set the correct zone for your location.
Under certain circumstances, such as during a long-distance, cross-country trip or moving to a new state or province, it will be necessary to compensate for compass variance by resetting the zone through the DIC if the zone is not set correctly.
Compass variance is the difference between the earth's magnetic north and true geographic north. If the compass is not set to the zone where you live, the compass may give false readings. The compass must be set to the variance zone in which the vehicle is traveling.
To adjust for compass variance, use the following procedure:
See also:
Cleaning Exterior Lamps/ Lenses and Emblems
Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean
exterior lamps and lenses. Follow instructions under "Washing the Vehicle" later
in this section. ...
Turning the System On and Off
The system can be disabled through the Driver Information Center (DIC).
See “Park Assist” under Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information.
URPA defaults ...
Easy Exit Driver Seat
This feature can move the seat rearward to allow extra room to exit the vehicle.
(Easy Exit Driver Seat): Press to recall the easy exit seat position.
The vehicle must be in P (Park).
If the easy ...





