Storing Memory Positions
To save into memory:
1. Adjust the driver seat, seatback recliner, both outside mirrors, and the throttle and brake pedals, if equipped.
See Power Mirrors on page 2‑15 and Adjustable Throttle and Brake Pedal on page 9‑27 for more information.
Not all mirrors and adjustable throttle and brake pedals will have the ability to save and recall their positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.” To recall, press and release “1” or “2.” The vehicle must be in P (Park).
A single beep will sound. The seat, outside mirrors, and adjustable throttle and brake pedals will move to the position previously stored for the identified driver.
See also:
Voltmeter Gauge
When the engine is not running, but the ignition is turned on, this gauge shows the battery's state of charge in DC volts.
When the engine is running, this gauge shows the condition of the charging ...
Pulling a Trailer
Here are some important points:
○ There are many laws, including speed limit restrictions that apply to trailering.
Check for legal requirements with state or provincial police.
○ Do n ...
How to Check Lubricant
2500HD with 6.0 L
All Other Series and Engines
To get an accurate reading, the vehicle should be on a level surface.
• For all 4.3 L, 4.8 L and 5.3 L 1500 Series applications, the proper leve ...