Seat Adjustment

WARNING
You can lose control of the vehicle if you try to adjust a manual driver seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.

Adjust the driver seat only when the vehicle is not moving.

To adjust the seat:

To adjust the seat:

1. Lift the bar under the front edge of the seat cushion to unlock the seat.

2. Slide the seat to the desired position and release the bar.

3. Try to move the seat back and forth to be sure the seat is locked in place.

    See also:

    Jump Starting
    For more information about the vehicle battery, see Battery on page 10‑26. Jump starting can be used on vehicles with run&-down batteries by using jumper cables and another vehicle. WARN ...

    OnStarĀ®
    If the vehicle is equipped with an active OnStar system, that system may also record data in crash or near crash-like situations. The OnStar Terms and Conditions provides information on data collectio ...

    Trailer Wiring Harness
    Basic Trailer Wiring The trailer wiring harness, with a seven-pin connector, is located at the rear of the vehicle and is tied to the vehicle's frame. The harness connector can be plugged into a seve ...