StabiliTrak® System

If equipped, the vehicle has a traction control system that limits wheel spin and the StabiliTrak system that assists with directional control of the vehicle in difficult driving conditions. Both systems turn on automatically every time the vehicle is started.

• To turn off traction control, press and release • To turn off both traction control and StabiliTrak, press and hold until on the instrument panel. The appropriate DIC message displays. See Ride Control System Messages on page 5‑47.

• To turn off both traction control and StabiliTrak, press and hold illuminates and the appropriate DIC message displays. See Ride Control System Messages on page 5‑47. until • Press and release again to turn on both systems. illuminates and the appropriate DIC message displays. See Ride Control System Messages on page 5‑47.

• Press and release For more information, see StabiliTrak® System on page 9‑59. again to turn on both systems.

For more information, see StabiliTrak® System on page 9‑59.

    See also:

    INTERIOR
    While the Acadia Denali's upgraded exterior is apparent, the interior falls a little flat. It looks good, but it's not an up-to-date look. The instrument cluster was blah-looking and seemed outdat ...

    Using the 3.5mm (1/8 in) Auxiliary Input Jack
    The auxiliary input jack is located on the lower right side of the faceplate. This is not an audio output; do not plug a headphone set into the front auxiliary input jack. Connect an auxiliary input ...

    Brake System Warning Light
    With the ignition on, the brake system warning light comes on when the parking brake is set. If the vehicle is driven with the parking brake engaged, a chime sounds when the vehicle speed is greater t ...