Dome Lamp Override

The dome lamp override button is located next to the exterior lamps control.

Reading Lamps: Press the button in and the dome lamps remain off when a door is opened. Press the button again to return it to the extended position so that the dome lamps come on when a door is opened.

    See also:

    Engine Coolant Heater
    The engine coolant heater, if available, can help in cold weather conditions at or below −18°C (0°F) for easier starting and better fuel economy during engine warm-up. Plug in the coolant ...

    USB Support
    The USB connector is located on the instrument panel or in the center console, and uses the USB 2.0 standard. ...

    Starting Procedure
    1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the key. The idle speed will go down as your engine gets warm. Do not race the engine imm ...