See also:

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
To replace one of these bulbs: 1. Open the tailgate. See Tailgate on page 2‑10 for more information. 2. Remove the two rear lamp assembly screws near the tailgate latch strikerpost and pull ...

Jump Starting
For more information about the vehicle battery, see Battery on page 10‑26. Jump starting can be used on vehicles with run&-down batteries by using jumper cables and another vehicle. WARN ...

Leaving After Parking on a Hill
1. Apply and hold the brake pedal. 2. Start the engine. 3. Shift into a gear. 4. Release the parking brake. 5. Let up on the brake pedal. 6. Drive slowly until the trailer is clear of the chocks. ...