Wheel Alignment and Tire Balance
The tires and wheels were aligned and balanced at the factory to provide the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing will not be necessary on a regular basis. However, check the alignment if there is unusual tire wear or if the vehicle is pulling to one side or the other. If the vehicle vibrates when driving on a smooth road, the tires and wheels might need to be rebalanced. See your dealer for proper diagnosis.
See also:
Exiting the Feature Settings Menu
The feature settings menu will be exited when any of the following occurs:
• The vehicle is no longer in ON/RUN.
• The trip/fuel or vehicle information DIC buttons are pressed.
• The end of t ...
Flash-to-Pass
This feature is used to signal to the vehicle ahead that you want to pass.
If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high be ...
Safety Belts
Safety Belts
Refer to the following sections for important information on how to use safety belts properly.
• Safety Belts on page 3‑12.
• How to Wear Safety Belts Properly on page 3& ...





