Parking on Hills
WARNING
Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move.
People can be injured, and both the vehicle and the trailer can be damaged. When possible, always park the rig on a flat surface.
If parking the rig on a hill:
1. Press the brake pedal, but do not shift into P (Park) yet.
Turn the wheels into the curb if facing downhill or into traffic if facing uphill.
2. Have someone place chocks under the trailer wheels.
3. When the wheel chocks are in place, release the brake pedal until the chocks absorb the load.
4. Reapply the brake pedal.
Then apply the parking brake and shift into P (Park).
5. Release the brake pedal.
See also:
Reducing Speed While Using Cruise Control
If the cruise control system is already activated, . Press and hold the SET– button on the steering wheel until the desired lower speed is reached, then release it.
• To slow down in small amount ...
AM-FM Radio and AM-FM Radio with CD Player
To set the clock:
1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press the button to turn the radio on.
2. Press the button until the hour numbers begin to flash, then turn the knob t ...
Park Brake and P (Park) Mechanism Check
WARNING
When you are doing this check, the vehicle could begin to move.
You or others could be injured and property could be damaged.
Make sure there is room in front of the vehicle in case it begi ...