Adjusting the Brightness and Contrast of the Screen

To adjust the brightness and contrast of the screen, press the MENU button while the rear vision camera image is on the display.

Any adjustments made will only affect the rear vision camera screen.

(Contrast): Touch the + (plus) or – (minus) screen buttons to increase or decrease the contrast of the screen. (Brightness): Touch the + (plus) or – (minus) screen buttons to increase or decrease the brightness of the screen.

Symbols (Contrast): Touch the + (plus) or – (minus) screen buttons to increase or decrease the contrast of the screen.

    See also:

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An obstacle ...

    Shutting the Engine Off After a Remote Start
    To manually shut off a remote start: • Aim the RKE transmitter at the vehicle and press until the parking lamps turn off. • Turn on the hazard warning flashers. • Turn the ignition switch on ...

    Electronic Transfer Case
    The transfer case knob is located next to the steering column. Use the dial to shift into and out of four-wheel drive. ...