Vehicles with Navigation System
The rear vision camera system is designed to help the driver when backing up by displaying a view of the area behind the vehicle.
When the driver shifts the vehicle into R (Reverse), the video image automatically appears on the navigation screen. Once the driver shifts out of R (Reverse), the navigation screen will go back to the last screen that had been displayed, after a delay.
See also:
Compass Calibration Procedure
1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located.
See “Compass Variance (Zone) Procedure” earlier in this section.
Do not ...
Hazard Warning Flashers
Hazard Warning Flasher:
Press this button located on the instrument panel below the audio system, to make the front and rear turn signal lamps flash on and off.
This warns others that you are hav ...
Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps:
1. Open the liftgate. See Liftgate on page 2‑9.
2. Remove the two screw covers from the taillamp assembly.
3. Remove the two screws securing the taillamp asse ...