How the System Works
URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working.
URPA operates only at speeds less than 8 km/h (5 mph).
An obstacle is indicated by audible beeps. The interval between the beeps becomes shorter as the vehicle gets closer to the obstacle.
When the distance is less than 30 cm (12 in) the beeping is a continuous tone for five seconds.
To be detected, objects must be at least 25 cm (10 in) off the ground and below liftgate level. Objects must also be within 2.5 m (8 ft) from the rear bumper. This distance may be less during warmer or humid weather.
See also:
Lap Belt (Crew and Extended Cab)
This section is only for the lap belt.
To learn how to wear a lap-shoulder belt, see Lap-Shoulder Belt on page 3‑15.
Your vehicle may have a center seating position. When you sit in the center ...
Language
This display allows you to select the language in which the DIC messages will appear. To select a language:
1. Press the trip odometer reset stem until ODOMETER displays.
2. While in the ODOMETER di ...
Hoses
Hoses transport fluids and should be regularly inspected to ensure that there are no cracks or leaks.
With a multi-point inspection, your dealer can inspect the hoses and advise if replacement is nee ...