Increasing Speed While Using Cruise Control

If the cruise control system is already activated:

• Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it.

• To increase vehicle speed in small increments, press the +RES button briefly. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster.

    See also:

    How to Check Automatic Transmission Fluid
    Because this operation can be a little difficult, it may be best to have this done at the dealer service department. If not taken to the dealer, be sure to follow all the instructions here or a false ...

    Turn Signals When Towing a Trailer
    The turn signal indicators on the instrument panel flash whenever signaling a turn or lane change. Properly hooked up, the trailer lamps also flash, telling other drivers the vehicle is turning, chan ...

    Removing Tools
    The tools needed to remove the spare tire are located in the storage compartment on the driver side, at the rear of the vehicle. 1. Open the jack storage compartment by pulling on the latch tab, loca ...