Temperature Control

The driver and passenger side temperature buttons are used to adjust the temperature of the air coming through the system. The temperature can be adjusted even if the system is turned off since outside air still enters the vehicle, unless the recirculation mode is selected. See “Recirculation” later in this section.

Driver Side Temperature Control: Press the + or − buttons to increase or decrease the driver side temperature. The driver side temperature display will show the temperature setting.

Passenger Side Temperature Control: Press the + or − buttons to increase or decrease the passenger side temperature.

The passenger side display will show the temperature setting.

PASS (Passenger): Press to set the passenger temperature to match the driver temperature setting.

The PASS indicator will turn off.

When the passenger temperature setting is different than the driver setting, the PASS indicator comes on.

    See also:

    Programming Universal Home Remote — Fixed Code
    For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to www.learcar2u.com. Most garage door openers sold before 1996 are Fixed Code units. Programming a gara ...

    Knob Retainer
    Floor mats with a knob retainer. Removing and Replacing the Floor Mat 1. Turn the knob until it is aligned with the slot in the floor mat grommet. 2. Pull up on the floor mat. 3. Center the slot ...

    Brake System Messages
    BRAKE FLUID LOW This message is displayed when the brake fluid level is low; see Brake Fluid on page 10‑24. RELEASE PARKING BRAKE This message is displayed as a reminder that the parking br ...