Transferring a Call
Audio can be transferred between the Bluetooth system and the cell phone.
The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.
Transferring Audio from the Bluetooth System to a Cell Phone
During a call with the audio in the vehicle:
1. Press 
.
2. Say “Transfer Call.”
Transferring Audio to the Bluetooth System from a Cell Phone
During a call with the audio on the cell phone, press . The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information.
See also:
Knob Retainer
Floor mats with a knob retainer.
Removing and Replacing the Floor Mat
1. Turn the knob until it is aligned with the slot in the floor mat grommet.
2. Pull up on the floor mat.
3. Center the slot ...
Cellular and GPS Antennas
Avoid placing items over or near the antenna to prevent blocking cellular and
GPS signal reception. Cellular reception is required for OnStar to send remote signals
to the vehicle. ...
Center High-Mounted Stoplamp (CHMSL) and Cargo Lamp
To replace one of these bulbs:
1. Remove the two screws and lift off the lamp assembly.
A. Cargo Lamp
B. Center High-Mounted Stoplamp (CHMSL) Bulb
2. On the reverse side of the lamp assembly, r ...