Call Waiting

Call waiting must be supported on the cell phone and enabled by the wireless service carrier.

• Press • Press again to return to the original call. to answer an incoming call when another call is active. The original call is placed on hold.
• Press • To ignore the incoming call, no action is required. again to return to the original call.
• To ignore the incoming call, no action is required.
• Press Three-Way Calling to disconnect the current call and switch to the call on hold.

    See also:

    Removing Tools
    The tools needed to remove the spare tire are located in the storage compartment on the driver side, at the rear of the vehicle. 1. Open the jack storage compartment by pulling on the latch tab, loca ...

    Belts
    • Belts may need replacing if they squeak or show signs of cracking or splitting. • Trained dealer technicians can inspect the belts and recommend replacement when necessary. ...

    What to Add
    Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids and Lubricants on page 11‑12. Always clean the brake fluid reservoir cap and the area around the cap before removi ...