Pairing
A Bluetooth enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used.
See the cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if equipped.
See OnStar Overview on page 14‑1 for more information.
See also:
Three-Way Calling
Three-way calling must be supported on the cell phone and enabled by the wireless
service carrier.
1. While on a call, press .
2. Say “Three&-way call.”
3. Use the dial or call command to ...
Programming Transmitters to the Vehicle
Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer.
When the replacement transmitter is ...
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.
• The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
...