Erasing Universal Remote Buttons

All programmed buttons should be erased when the vehicle is sold or the lease ends.

To erase all programmed buttons on the Universal Remote device:

1. Press and hold down the two outside buttons until the indicator light begins to flash, after 20 seconds.

1. Press and hold down the two outside buttons until the indicator light begins to flash, after 20 seconds.

2. Release both buttons.

    See also:

    Muting a Call
    During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. • To mute a call, press , and then say “Mute call.” . To cancel ...

    Ultrasonic Parking Assist
    If available, the Ultrasonic Rear Parking Assist (URPA) system assists the driver with parking and avoiding objects while in R (Reverse). URPA operates at speeds less than 8 km/h (5 mph). The sensors ...

    Using Softkeys to Control a USB Storage Device or iPod
    The five softkeys below the radio display are used to control the functions listed below. To use the softkeys: 1. Press the first or fifth softkey below the radio display to display the functions li ...