Resetting the Power Folding Mirrors

Reset the power folding mirrors if:
• The mirrors are accidentally obstructed while folding.
• They are accidentally manually folded/unfolded.
• The mirrors vibrate at normal driving speeds.

To reset the mirrors, fold and unfold the mirrors one time using the power folding mirror controls.

A popping noise may be heard during the resetting. This sound is normal during the reset operation.

    See also:

    Shifting Out of Neutral
    To shift out of N (Neutral) do the following: 1. Set the parking brake and apply the regular brake pedal. 2. Turn the ignition to ON/RUN with the engine off, and shift the transmission to N (Neutral ...

    Disconnecting the RVC
    The rear vision camera must be disconnected if the tailgate needs to be removed. To disconnect the camera: 1. Remove the license plate. 2. Disconnect the camera connectors from the chassis harness, ...

    Add-on Electrical Equipment
    The OnStar system is integrated into the electrical architecture of the vehicle. Do not add any electrical equipment. See Add-On Electrical Equipment on page 9‑64. Added electrical equipment ...