Power Mirrors

Base Model
Base Model

To adjust the mirrors:

1. Press to select a mirror. or 2. Press the control pad to adjust the mirror. to select a mirror.

2. Press the control pad to adjust the mirror.

3. Return the switch to the center to deselect the mirror.

Uplevel Model
Uplevel Model

To adjust the mirrors:
1. Press (A) or (B) to select a mirror.
2. Press the control pad to adjust the mirror.
3. Press (A) or (B) again to deselect the mirror.

    See also:

    Door Ajar Messages
    DRIVER DOOR OPEN This message displays and a chime sounds if the driver door is not fully closed and the vehicle is shifted out of P (Park). Stop and turn off the vehicle, check the door for obstruct ...

    Cleaning the RSE Overhead Console
    When cleaning the RSE overhead console surface, use only a clean cloth dampened with clean water. ...

    How the System Works
    URPA comes on automatically when the shift lever is moved into R (Reverse). A single tone sounds to indicate the system is working. URPA operates only at speeds less than 8 km/h (5 mph). An obstacle ...