Manual Liftgate
To unlock the liftgate, press the power door lock switch or press 
on the Remote Keyless Entry (RKE) transmitter twice.
See Remote Keyless Entry (RKE) System Operation on page 2‑3.
To open the liftgate, press the touch pad under the liftgate handle and lift up. The vehicle must be in P (Park) and the battery must be charged.
Use the pull handle to lower and close the liftgate.
Always close the liftgate before driving.
See also:
Windshield and Wiper Blades
Clean the outside of the windshield with glass cleaner.
Clean rubber blades using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroug ...
Disconnecting the RVC
The rear vision camera must be disconnected if the tailgate needs to be removed.
To disconnect the camera:
1. Remove the license plate.
2. Disconnect the camera connectors from the chassis harness, ...
Grade Braking (6-Speed Automatic Transmission)
The Grade Braking shift modes can be activated by pressing the button on the end of the shift control lever.
While in Range Selection Mode, Grade Braking is deactivated allowing the driver to select ...