Hands-Free Calling

1. Push ready.” System responds: “OnStar ready.”
2. Say “Dial.” System responds: “Please say the name or number to call.”
3. Say the entire number without pausing, including a “1” and the area code. System responds: “OK calling.”

    See also:

    Certification Label
    Label Example A vehicle-specific Certification label is attached to the lower center pillar on the driver side of the vehicle or on the rear edge of the driver door. The label shows the size of ...

    Shutting the Engine Off After a Remote Start
    To manually shut off a remote start: • Aim the RKE transmitter at the vehicle and press until the parking lamps turn off. • Turn on the hazard warning flashers. • Turn the ignition switch on ...

    Erasing Universal Remote Buttons
    All programmed buttons should be erased when the vehicle is sold or the lease ends. To erase all programmed buttons on the Universal Remote device: 1. Press and hold down the two outside buttons u ...