Top Tether Anchor
A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.
Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor.
Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for your child restraint.
See also:
Using the DVD Player
The DVD player can be controlled by the buttons on the remote control, the RSA system, or by the buttons on the radio faceplate.
See “Remote Control” under Rear Seat Entertainment (RSE) System on ...
Exterior
The Canyon is saddled with an angular headlight brow, borrowed from the
Colorado, that forces a more trapezoidal execution of the grille than do
standard GMC truckfront ends. Other GMC trucks, inc ...
Hitches
It is important to have the correct hitch equipment. Crosswinds, large trucks going by, and rough roads are a few reasons why the right hitch is needed.
• The rear bumper on the vehicle is not inte ...